Ordinary
Portland cement (OPC)
The
cement produced by inter grinding of cement clinker prepared in rotary cement
kiln along with 3-5% gypsum only are called as ordinary Portland cement (OPC).
Depending
upon the strength requirement OPC is further classified as OPC-33 grade, OPc-43
grade and OPC-53 grade.
The
43 grade OPC is the most popular general purpose cement in the country today.
The production of 43 grade OPC is nearly 50% of the total production of cement
in the country.
The
43 grade OPC can be used for following applications:
·
General civil engineering
construction work
·
RCC works (preferably where grade
of concrete is up to M-30)
·
Precast items such as blocks,
tiles, pipes etc.
·
Non- structural works such as
plastering, flooring etc.
The
compressive strength of cement when tested as per IS code shall be minimum 43
MPa.
Conforming
IS 8112-1989 the properties of this cement are given:
Setting
time-
Initial
setting time – 30 minute (min.)
Final
setting time – 600 minute (max.)
Compressive
strength –
Age
|
Compressive
strength
|
3
days
|
23
MPa (min.)
|
7
days
|
33
MPa (min.)
|
28
days
|
43
MPa (min.)
|
Portland
Puzzolana Cement (PPC) –
The
Portland Puzzolana Cement is a kind of Blended Cement which is produced by
either inter grinding of OPC clinker along with gypsum and pozzolanic materials
in certain proportions or grinding the OPC clinker, gypsum and Pozzolanic
materials separately and thoroughly blending them in certain proportions.
Pozzolana
is a natural or artificial material containing silica in a reactive form. It
may be further discussed as siliceous or siliceous and aluminous material which
in itself possesses little, or no cementations properties but will in finely
divided form and in the presence of moisture, chemically react with calcium
hydroxide at ordinary temperature to form compounds possessing cementations properties.
It is essential that puzzolana be in a finely divided state as it is only then
that silica can combine with calcium hydroxide (liberated by the hydrating
Portland cement) in the presence of water to form stable calcium silicates
which have cementations properties. The puzzolanic materials commonly used are:
- Volcanic
ash
- Calcined
clay
- Fly ash
- Silica fumes
The Indian
standards for Portland Puzzolana Cement have been issued in two parts based on
the type of puzzolanic materials to be used in manufacturing of Portland Puzzolana
Cement as given below:
IS 1489
(Part 1) 1991, Portland Puzzolana Cement – specification (fly ash based)
IS 1489
(Part 2) 1991, Portland Puzzolana Cement – specification (Calcined clay
based)
the quality of flyash or calcined clay to be used in manufacturing of PPC is also specified by BIS in the following standards:
the quality of flyash or calcined clay to be used in manufacturing of PPC is also specified by BIS in the following standards:
IS 3812
1981 – specification for flyash as puzzolana and admixture
IS 1344 1981 – specification for calcined clay puzzolana
In view of the availability of good quality fly ash in abundant quantity, the use of calcined clay based puzzolana cement is progressively decreasing. The flyash is a waste product of Thermal power Plant which creates disposal problems at Thermal power plant site. The yearly production of flyash in India is about 70 million tonnes per annum. This would increase in future depending upon the new coal based thermal power plants to be installed in the country. The present utilisation of fly ash in production of blended cement in India is meagre.
IS 1344 1981 – specification for calcined clay puzzolana
In view of the availability of good quality fly ash in abundant quantity, the use of calcined clay based puzzolana cement is progressively decreasing. The flyash is a waste product of Thermal power Plant which creates disposal problems at Thermal power plant site. The yearly production of flyash in India is about 70 million tonnes per annum. This would increase in future depending upon the new coal based thermal power plants to be installed in the country. The present utilisation of fly ash in production of blended cement in India is meagre.
PPC score better result with ages so it can be complete replace
for general uses such as Fly ash is the ash precipitated
electrostatically from the exhaust fumes of coal fired power station. The fly
ash particles are spherical and are generally of higher fineness than cement so
that the silica is readily available for reaction. As per IS 3812: 1981 the
percentage of silica and alumina should be minimum 70% and maximum loss on
ignition 12%. Much superior quality fly ash is available from Indian thermal
power plants than specified in IS code.
The
Portland Pozzolana Cement makes concrete more impermeable and denser as
compared to Ordinary Portland Cement.
The
long-term strength (90 days and above) of Pozzolana cement is better compared
to OPC.
The
Portland Puzzolana Cement is ideally suited for the following construction.
-Hydraulic structures
-Mass concreting works
-Marine structures
-Masonry mortars and plastering
-Under aggressive conditions.
-All other application where OPC is used.
-Mass concreting works
-Marine structures
-Masonry mortars and plastering
-Under aggressive conditions.
-All other application where OPC is used.
The
compressive strength of PPC as per BIS code at present is equivalent to that of
43 grade OPC.
The PPC
being manufactured by ‘India Cements Ltd’ meets the strength requirements of 53
grade.
Setting
time –
·
Initial setting time – 30 minute (min)
·
Final setting time – 600 minute (min)
Compressive
strength –
Age
|
compressive strength
|
3 days
|
16 MPa
|
7 days
|
22 MPa
|
28 days
|
33 MPa
|
Advantages:
PPC
has certain distinct advantages over OPC, as listed below:
·
Low heat of hydration reducing
chances of surface cracks
·
Longer setting time making it more
workable than OPC
·
Ultimate strength higher than OPC
·
Lower porosity imparting the
concrete more water tightness
·
Waste utilization making it more
environmental friendly buildings, factories, warehouses etc.
·
it was very helpful...thanks
ReplyDeleteAlthough, we're completely aware that your reputed marketing firm has a significant manufacturing plant in Lowndes County. And make sure everyone is willing to make the product with the client to develop kind of a loan. I business put all my old hand tools in the front cover. Gregg Gilbert business Bank of America/Merrill LynchThank you. Now what would happen if today's сhuгсh actually dіd ωhat Goԁ сommanԁs?
ReplyDeleteAlѕo νisіt my site archhurd.org